110
Chapter 3
VEE Measurement Program Operation
Measurement
Figure 3-57
Fast Micro Track Menu
2. Set the parameters, click on each button to enter a new value.
Channel Bit Rate
Specifies the speed at which data bits are
written on the media per second [bps].
Write Current
Specifies the current applied to the write head.
Sense Current
Specifies the current applied to the read head.
Data Pattern
Specifies the data pattern to be written on the
test track. To set the data pattern, click on the
[Configuration] > [Setup] > [Pattern Config]
buttons to open the data pattern menu.
Track #
Specifies the track number to be tested.
Side Erase Position
Specifies the position to erase the side of the
track in creating a micro track.
Side Erase Mode
Specifies the erase method. When “Erase
Both” is selected, both sides of the track will
be erased. When “Erase Single Side” is
selected, only one side of the track will be
erased. See
“hpe5022_measureMicroTracProfile”
function.
Offset Start
Specifies the starting point of the head offset
in measuring the TAA track profile.
Offset Stop
Specifies the stopping point of the head offset
in measuring the TAA track profile.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com