68
Chapter 2
Using System Features
Using Input/Output Configuration Keys
• Host Name - Displays the host name of the instrument. Pressing
the key activates the alpha editor, which enables you to change the
host name.
• Ethernet Addr - Shows the Ethernet address. This is an
information only feature that can not be modified by the user.
• SCPI LAN - Accesses the following keys:
Telnet Port - Turns on or off telnet programming over the LAN.
This key only affects new connections, not existing connections.
Enter the port number that you will use for your telnet
connection to the transmitter tester. The default port number is
5023.
Socket Port - Turns on or off socket programming over the LAN.
This key only affects new connections, not existing connections.
Enter the port number that you will use for your socket
connection to the transmitter tester. The default port number is
5025.
• SICL Server - Accesses the following keys. These keys are provided
for information only. The “value” of the settings cannot be changed.
Server - Indicates the on/off condition of the SICL IEEE 488.2
protocol LAN server.
Maximum Connections - Shows you the maximum number of
connections that can be accessed simultaneously. The default is 5.
Instrument Name - Shows you the name (same as the remote
SICL address) of your transmitter tester. The default is
instr0
.
Instrument Logical Unit - Shows you the unique integer
assigned to your transmitter tester when using SICL LAN. The
default is 8.
Emulated GPIB Name - Shows you the name (same as the
remote SICL address) of the device used when communicating
with your transmitter tester. The default is
gpib7
.
Emulated GPIB Logical Unit - Shows you the unique integer
assigned to your device when it is being controlled using SICL
LAN. The default is 8.
Emulated GPIB Address - Shows you the emulated GPIB
address assigned to your transmitter tester when it is a SICL
server. This address is set using the
GPIB Address
key.
NOTE
For more information these and other remote programming features,
refer to the programmer’s guide for your transmitter tester.
• File System - Shows the current amount of
Used
memory and
Free
memory in units of megabyte (MB).
Summary of Contents for E4406A
