Agilent Technologies Agilent E5810A, User Manual

Page: 159 / 177

Appendix C 159
Using the Telnet Utility
Telnet Commands for the E5810
Command Description
gpib-name
<string*15> View/Set the GPIB SICL Interface Name
gpib-address
<0-30> View/Set the GPIB System Controller Address
gpib-unit
<1-255> View/Set the GPIB Logical Unit Number
rs232-name
<string*15> View/Set the RS-232 SICL Interface Name
rs232-baud
<300|1200|2400|4800|9600|
19200|38400|57600|115200>
View/Set Baud Rate
rs232-bits
<5|6|7|8> View/Set number of RS-232 data Bits
rs232-stopbits
<1|2> View/Set number of RS-232 Stop Bits
rs232-parity
<NONE|EVEN|ODD|MARK|
SPACE>
View/Set the RS-232 Parity
rs232-flow
<NONE|XON|RTS|DTR>
View/Set the RS-232 Flow Control
rs232-srq
<RI|DSR|DCD|CTS> View/Set the RS-232 SRQ Line
status
View the LAN/GPIB Gateway Connection Status
syslog-display
View Contents of the Syslog
syslog-clear
Clear the Syslog
password
Enter the Password (when prompted)
(Password is required when making changes)
changepassword
Change the Password (when prompted)
reboot
Save Configuration and Reboot E5810
factory-reset Reset Config to Factory Defaults and Reboot
exit
Exit WITHOUT Saving Configuration (see reboot)
quit Exit WITHOUT Saving Configuration (see reboot)
bye Exit WITHOUT Saving Configuration (see reboot)