3-21
Verifying Performance
Agilent Technologies 8922M/S Specifications
Phase and Frequency Measurements
After one timeslot, 577
µ
s, from an isolated Receiver Hop Trigger in the GSM
Frequency bands.
0.3 GMSK Data Recovery (Agilent 8922M only)
After one timeslot, 577
µ
s, from an isolated Receiver Hop Trigger in the GSM
Frequency bands
Range
RF In/Out
−
6 to +41 dBm
Aux RF In
−
36 to +20 dBm
Input Frequency Setting Error
±
10 kHz
Input Level Setting Error
±
3 dB
RMS phase error accuracy
≤
1
°
rms
Peak phase error accuracy
≤
4
°
peak
Frequency error accuracy
±
[0.02 ppm (18 Hz) + reference accuracy], for normal bursts.
Typically
±
[0.03ppm (27 Hz) + reference accuracy] for RACH bursts.
Supplemental Characteristics
After three timeslots, 1.73 ms, from an isolated Receiver Hop Triggering the GSM frequency band.
RMS phase error accuracy
≤
0.5
°
rms
Peak phase error accuracy
≤
2
°
peak
Frequency error accuracy
±
[0.01 ppm (9 Hz) + reference accuracy], for normal bursts.
±
[0.02 ppm (18 Hz) + reference accuracy] for RACH bursts.
Range
RF In/Out
−
6 to +41 dBm
Aux RF In
−
36 to +20 dBm
Input Frequency Setting Error
±
100 Hz
Required Input Phase Accuracy
≤
5
°
rms
,
≤
20
°
peak
Demodulation Duty Cycle
1 timeslot per frame
Outputs
Data, Clock and Data Valid
Data Output Clock
Clocked at 1 MHz rate
Delay, data
≤
1 frame (4.62 ms).
Output Level
TTL
Summary of Contents for 8922M
