8-18
Instrument BASIC
Entering and Editing Programs
Other PROG Commands
Two additional PROG Commands are used to prepare the Agilent 8922M/S’s
IBASIC Controller RAM for receiving programs.
OUTPUT Addr;”PROG:DEL”
deletes any programs currently residing in RAM.
OUTPUT Addr;”PROG:DEF #0”
defines the address in RAM where a downloaded program will be stored.
Preparing the Agilent 8922M/S to Receive Programs
1
Configure the GPIB port as described in this chapter, ‘GPIB Configuration For
Programming” on page 8-5.
2
Access the IBASIC Controller screen.
Downloading A Program Into the Agilent 8922M/S
This procedure assumes your Agilent 8922M/S’s GPIB address is 14. If it is not,
change the address in the following procedure to match your instrument’s address.
1
Load the IBASIC program to be downloaded into your controller.
2
Enter these commands to transfer the program to the Agilent 8922M/S:
10
DIM LINE$[200], FILE_NAME$[120]
20
Addr=714
30
INPUT ”NAME OF (ASCII) IBASIC FILE TO DOWN-
LOAD?”, FILE_NAME
$
40
ASSIGN @FILE TO FILE_NAME$; FORMAT ON
50
ON END @FILE GOTO DONE
60
OUTPUT Addr;”PROG:DEL”
70
OUTPUT Addr;”PROG:DEF #0”
80
WHILE (1)
90
ENTER @FILE; LINE$
100
OUTPUT Addr; LINE$
110
END WHILE
120
DONE: !
130
OUTPUT Addr; ” ” END
140
PRINT ”Done with down-load”
150
END
Figure 8-6
Download Program for Computers using GPIB
To verify that your code was downloaded, type in the command-
OUTPUT
714;”PROG:EXEC ‘LIST ’”
. Your program should be listed on the Agilent
8922M/S’s IBASIC Controller screen.
Summary of Contents for 8922M
