Agilent Technologies 4352B, Service Manual

Page: 60 / 293

2. Press 4 Preset 5 to initialize the 4352B.
3.
Press 4
Meas
5 ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
INST TYPE ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
VCO ANALY to set the instrument type to Analyzer mode .
4.
Press 4 Meas 5 ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
RF TRANSIENT to set the measurement item to Frequency Transient.
5. Set the output level from the signal generator (SG#2) to 0 dBm.
6. Set the signal generator (SG#2) output frequency to 880 MHz.
7.
Press 4
Sense Range
5 ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
RF MAX FREQ , 4
9
5 , 4
6
5 , 4
0
5 , 4
M/
5 to set the maximum frequency for RF
transient measurement to 960 MHz.
8. Press 4 Sense Range 5 ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
RF MIN FREQ , 4 3 5 , 4 2 5 , 4 0 5 , 4 M/ 5 to set the minimum frequency for RF
transient measurement to 320 MHz.
9. Press 4 T rigger 5 ,
NNNNNNNNNNNNNNNNNNNN
SINGLE to make one sweep measurement.
10.
Press 4 Menu 5 ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
MKR SEARCH ,
NNNNNNNNNNN
MAX to move the marker to the maximum frequency point on
the trace . Record the 4352B marker reading on the P erformance T est Record.
11.
Press
NNNNNNNNNNN
MIN to move the marker to the minimum frequency point on the trace . Record the
4352B marker reading on the P erformance T est Record.
12. Set the output frequency of the signal generator (SG#2) and the maximum/minimum
frequency for RF transient measurement in accordance with the following table . (Refer
to the above setting procedures as reference .) Record the 4352B marker reading (each
maximum/minimum frequency point) on the P erformance T est Record.
SG#2 Output RF TRANS
MAX FREQ
RF TRANS MIN
FREQ
880 MHz 884 MHz 854 MHz
880 MHz 880.3 MHz 878.3 MHz
25 MHz 30 MHz 10 MHz
P erformance T ests 2-29