Agilent Technologies 4352B, Service Manual

Page: 278 / 293

Error Messages (Alphabetical Order)
52 DC Output On Required in AFC
The automatic frequency control function was set on, however , the power or control voltage is
not being applied to the DUT .
V erify that the power/control voltages output is set to ON on the LCD display information (the
measurement setting parameter display or the status notations). If the power/control voltage
output is turned to OFF , press 4
DC Pow er
5 or 4
DC Control
5 , and
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
OUTPUT ON off .
76 DC P ower Current Overload
The current through the DC POWER connector is too large (50 mA or more).
P ossible problems and the corrective action are shown below:
The DUT's power current is too large .
V erify that the DUT is correctly connected to the 4352B .
An eect of the high value capacitor connected to the DUT's power voltage (V
cc
) terminal.
This is a transient error . W ait until the DC POWER voltage is stabilized, then perform the
measurement.
0230 Data corrupt or stale
P ossibly invalid data. New reading started but not completed since last access .
0225 Data out of memory
The 4352B has insucient memory to perform the requested operation.
0222 Data out of range
A legal program data element was parsed but could not be executed because the interpreted
value was outside the legal range as dened by the 4352B (see IEEE 488.2, 11.5.1.1.5).
0231 Data questionable
Indicates that the measurement accuracy is suspect.
0104 Data type error
The parser recognized a data element that is not allowed. F or example , numeric or string data
was expected but block data was encountered.
135 DUPLICA TE FILE EXTENSION
The extension name entered is already used for other le types . Use a dierent extension
name .
0200 Execution error
This is the generic syntax error that the 4352B displays when it cannot detect more specic
errors . This code indicates only that an execution error as dened in IEEE 488.2, 11.5.1.1.5 has
occurred.
0123 Exponent too large
The magnitude of the exponent was larger than 32000 (see IEEE 488.2, 7.7.2.4.1).
Messages-5