Agilent Technologies 4352B, Service Manual

Page: 195 / 293

d a
Backup Options
Format Disk : ON (or OFF)
Verify Data : ON (or OFF)
Note
This option is available on Bootloader revision 1.01 and above . Before
performing SYSTEM B A CKUP , the exible disk must be initialized as LIF format
when the bootloader revision is 1.00.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
VERIFY OPTION toggles verify option on and o. When the verify option is set to on,
the system stored in the exible disk is veried to be the same as the
current rmware in the analyzer . When the verify option is set to
o, the verication is not performed. The default setting is on. The
verify option setting is displayed as shown above .
NNNNNNNNNNNNNNNNNNNNNNNNNN
CONTINUE
continues making the system backup . Before pressing this softkey ,
insert a disk into the FDD on the front panel.
NNNNNNNNNNNNNNNNNNNN
CANCEL
stops making the system backup and returns to the Bootloader menu.
WWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWW
PREVIEW DISK
Displays the revision information of the rmware stored in the rmware disk as shown below .
Before pressing this softkey , insert a rmware disk into the FDD on the front panel.
d a
Update Disk Revision
4352B Format Disk REVN.NN : MON DD YEAR
where N.NN: Revision Number
MON DD YEAR: Implementation Date (Month Day Y ear)
WWWWWWWWWWWWWWWWWWWWWWWWWW
REBOOT
Reboots the analyzer . If the rmware is installed, the analyzer boots up using the new
rmware . After pressing the softkey , the analyzer performs the normal power on sequence .
9-30 Service K ey Menus