Agilent Technologies 4352B, Service Manual

Page: 280 / 293

Error Messages (Alphabetical Order)
0282 Illegal program name
The name used to reference a program was invalid. F or example , redening an existing
program, deleting a nonexistent program, or in general, referencing a nonexistent program.
0283 Illegal variable name
An attempt was made to reference a nonexistent variable in a program.
0213 Init ignored
A request for a measurement initiation was ignored as another measurement was already in
progress .
159 INSUFFICIENT memory
If a lot of tasks are executed at the same time , memory might be insucient for a while .
(F or example , if running an HP Instrument B ASIC program, printing a screen, and sending or
receiving data array by GPIB are requested at the same time .) W ait until nishing some tasks
then execute the next task.
40 Insucient RF Level
The input level to the 4352B RF IN connector is too low (less than 020 dBm).
V erify that the DUT is correctly connected to the 4352B . Also , verify that the power/control
voltage output is turned ON on the LCD display information (the measurement setting
parameter display or the status notations). If it is OFF , press 4
DC Pow er
5 or 4
DC Control
5 , and press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
OUTPUT ON off .
This message is also displayed if a positive DC voltage component (TTL output, etc .) is included
in the DUT's output signal. In this case , insert a high-pass lter to suciently eliminate the
positive DC voltage component.
0161 Invalid block data
A block data element was expected, but was invalid for some reason (see IEEE 488.2, 7.7.6.2).
F or example , an END message was received before the length was satised.
0141 Invalid character data
Either the character data element contains an invalid character or the particular element
received is not valid for the header .
0121 Invalid character in number
An invalid character for the data type being parsed was encountered. F or example , an alpha
character in a decimal numeric or a \9" in octal data.
0101 Invalid character
A syntax element contains a character that is invalid for that type . F or example , a header
containing an ampersand (SING& ).
171 INV ALID D A TE
The date entered to set the real time clock is invalid. Re-enter the correct date .
Messages-7