Agilent Technologies 4352B, Service Manual

Page: 283 / 293

Error Messages (Alphabetical Order)
0120 Numeric data error
This error , as well as errors 0121 through 0129, are generated when parsing a data element
that appears to be numeric , including the nondecimal numeric types . This error message might
be displayed if the 4352B detects an unknown problem.
0128 Numeric data not allowed
A legal numeric data element was received, but the 4352B does not accept it in this position
for a header .
75 PO WER F AILED ON nnn
Serious error . Contact your nearest Agilent T echnologies oce . One or more power supply
failed. where nnn is one of 05 V , 015 V , +5 V , +15 V , +65 V , and PostRegHot . It shows which
power line failed. When this error occurs , the system halts so an external controller cannot
read this error using GPIB .
22 PRINTER:not on, not connect, wrong address
Indicates that the printer did not respond when the 4352B tried to access the printer via GPIB .
V erify power to the printer , and check the GPIB connection between the 4352B and the printer .
Ensure that the printer address recognized by the 4352B matches the GPIB address set on the
printer itself.
0108 P arameter not allowed
More parameters were received than expected for the header . F or example , the *SRE command
only accepts one parameter , so receiving *SRE 4,16 is not allowed.
0284 Program currently running
Certain operations dealing with programs may be illegal while the program is running. F or
example , deleting a running program might not be possible .
0280 Program error
Indicates that a downloaded program-related execution error occurred. This error message
might be displayed if the 4352B detects an unknown problem related to errors 0281 through
0289.
0112 Program mnemonic too long
The header contains more than twelve characters (see IEEE 488.2, 7.6.1.4.1).
0286 Program runtime error
A program runtime error of the HP Instrument B ASIC has occurred. T o get more specic error
information, use the ERRM$ or ERRN command (HP Instrument B ASIC).
0285 Program syntax error
Indicates that a syntax error appears in a downloaded program. The syntax used when parsing
the downloaded program is device-specic .
Messages-10