AGFA Drystar 5300, Reference Manual

Page: 185 / 210

185
2920B EN 20031206
Startup errors
Error messages while the printer starts up
The table below lists the possible error messages which can appear on the
display of the control panel while the printer starts up.
"
Contact your local service organization in case the self test fails.
"
Error messages can also appear when the printer has already started up.
Refer to
‘Checking error messages’ on page 173 .
After starting up the Drystar 5300, the printer performs a self test. A progress
indicator will show the proceeding of this self test. During the self test, a
number of messages can appear, meaning that the self test has failed.
Display self test failed
In case the display self test failed, following message appears:
The code ‘xx’ can help the Service engineer with the troubleshooting process.
System self test failed
In case the system self test failed, following message appears:
Error message Cause of error
ERROR display failure: xx ‘Display self test failed’
ERROR system failure ‘System self test failed’
ERROR
Display failure : xx
ERROR
System failure