AGFA Drystar 5300, Reference Manual

Page: 167 / 210

167
2920B EN 20031206
10
Clean the print head resistor line.
Gently pass over the resistor line a few times with a lint free cloth, slightly
moistened with Isopropyl alcohol or Ethanol. Do this only in one direction, i.e.
from left to right, without lifting the cloth.
"
Do not apply any pressure on the print head because this pressure may
cause damage on the interconnections underneath the print head.
11
Close the top cover.
After you have cleaned the print head resistor line and you have closed the top
cover, the printer will restart automatically.
"
If residue dust is present as part of the cleaning procedure it will
disappear after a few prints.