AGFA Drystar 5300 Reference Manual Download Page 108

Page: 108 / 210

108

2920B EN 20031206

Service actions

The Drystar 5300 has the capability of assisting the Service engineer to
maintain or repair the printer.

Overview of service actions

Four groups of service actions are provided by the Drystar 5300.

Action

Purpose

Who?

Error messages

• To have an overview of

the errors that have
occurred.

• Customer (hospital

technician)

• Service engineer

Warning
messages

• To have an overview of

the warnings that have
occurred.

• Customer (hospital

technician)

• Service engineer

Repair history

• To have an overview of

the repair operations
that have been
executed.

• Service engineer

Maintenance

• To have an overview of

the maintenance actions
that are still open.

• To close a maintenance

action when finished.

• To update a

maintenance action.

• Service engineer

Summary of Contents for Drystar 5300



















































































































































































































Search results

Summary of Contents for Drystar 5300

Reviews:

Related manuals for Drystar 5300

Brands by name

Popular brands

AGFA Drystar 5300, Reference Manual

Search results

Summary of Contents for Drystar 5300

Reviews:

Related manuals for Drystar 5300

Brands by name

Popular brands