AGFA Drystar 5300, Reference Manual

Page: 130 / 210

130
2920B EN 20031206
Example 2: if the IP address is 123.1.123.123, then the data entry should be as
follows:
4
Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The ‘Service Host IP address’ screen is displayed:
If the IP address has already been assigned, it will be shown on the display.
5
Enter the service host IP address by means of the arrow keys. Refer to ‘Data
entry’ on page 27 .
"
If no service host PC is installed, press the Confirm key. The service host
IP address will be set to ‘000.000.000.000’.
"
Note that blank spaces will be ignored (see examples on next page).
Example 1: if the IP address is 123.001.123.123, then the data entry should be as
follows:
Example 2: if the IP address is 123.1.123.123, then the data entry should be as
follows:
6
Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Printer IP addr.:
1 23. 1.123.123
(255.255.255.255)
IN
Serv.Host IP addr.
1 23.123.123.123
(255.255.255.255)
IN
Serv.Host IP add:
1 23.001.123.123
(255.255.255.255)
IN
Serv.Host IP add:
1 23. 1.123.123
(255.255.255.255)
IN