AGFA Drystar 5300, Reference Manual

Page: 142 / 210

142
2920B EN 20031206
Setting up the connection
Setting up a direct link (configuration with crossed network
cable)
To set up a direct link, you have to follow two procedures:
•
Attribute a fixed IP address to the PC,
•
Switch off all proxy setting in the browser.
When setting up a link, bare in mind the following important hints:
•
Always make the physical connection first,
•
Depending on the PC and/or Operating System, a reboot may be necessary in
order to make the new configuration work.
Attributing a fixed IP address to the PC
1
Go to Settings via the Start menu of Windows and click Control Panel.
The Control Panel menu will appear.