Aficio c7528n, Setup Manual

Page: 539 / 660

Replacing Consumables and Maintenance Kit
58
Replacing the Fusing Unit
If “Replace Fusing Unit (Type C)” appears on the display, replace the fusing unit.
A
Turn off the power, and then unplug the power cable.
❒
Be sure to wait about an hour to avoid burns.
B
If the 2 tray finisher or the booklet finisher is installed, detach it from the
printer.
p.37 “Detaching the SR960 (2 Tray Finisher)”
p.38 “Detaching the SR950 (Booklet Finisher)”
C
If the duplex unit is installed, open the duplex reversal unit.
p.38 “Opening and Closing the Duplex Reversal Unit”
D
If the external tray is attached to the printer, raise it in the direction of
the arrow ( ), and then remove it ( ).
• The fusing unit becomes very hot. When installing a new fusing unit, turn off
the printer and wait about an hour. After that, install the new fusing unit. Not
waiting for the unit to cool could result in a burn.
• Touch only the handles, no other parts. The fusing unit gets very hot and
will burn your hands if you touch it.
Replace Fusing
Unit (Type C)