Aficio c7528n, Setup Manual

Page: 413 / 660

Using a Printer Server
273
• NCP Distribution Protocol: Select the protocol to be used for NCP distribu-
tion.
G
Confirm the settings, and then click [ Apply ].
Configuration is now complete. Wait for several minutes if you want to restart
Web Image Monitor.
H
To check that the configuration is made correctly, enter the following from
the command prompt.
F:> USERLIST
❒
If the printer works as configured, the name of the print server appears as
a connected user.
❒
If you cannot identify the printer you want to configure, check the printer
name with the configuration page printed from the printer. For details about
printing a configuration page, see
p.161 “Printing a Configuration Page” .
❒
If no printer names appear in the list, match the frame types of IPX/SPXs
for the computer and printer. Use the
[ Network ] dialog box of Windows to
change the frame type of the computer.
For details about changing the printer's frame type (“NW Frame Type”),
see “Configuring the Printer”, Setup Guide.
Setting Up as a Print Server (NetWare 4.x, 5/5.1, 6/6.5)
Follow the procedure below to connect the printer as a print server using Net-
Ware 4.x, NetWare 5/5.1, or NetWare 6.0.
❒
When using the printer as a print server in NetWare 4.x, NetWare 5/5.1, or
NetWare 6.0, set it to the NDS mode.
❒
When using NetWare 5/5.1 or NetWare 6.0, set the printer as a print server.
A
Log on to the file server as a supervisor or supervisor equivalent.
B
Start NIB Setup Tool on the [ Start ] menu.
C
Click [ Wizard ], and then click [ OK ].
D
Select the printer you want to configure, and then click [ Finish ].
A dialog box prompting you to perform the remaining configuration tasks in the
Web browser appears. Click
[ OK ] , and then wait until Web Image Monitor
starts automatically.
E
A dialog box for entering the user name and password appears.
Enter the user name and password, and then click OK.