manualshive.com logo in svg

Aficio c7528n, Setup Manual

Share
Download
Aficio c7528n Setup Manual Download Page 244

Other Print Operations

104

❖

Printing a document using 

[

Data security for copying

]

1.

The print preview of the pattern and the text you set is displayed.

2.

The document is copied to the machine that the Copy Data Security unit

is installed.

3.

The document is blanked by gray overprint.

For details about setting 

[

Data security for copying

]

, see Printer Driver Help.

❒

Only the RPCS printer driver is supported.

❒

You cannot partially embed a pattern and text in a document.

❒

Use 182 

×

 257 mm (7

1

/

4

 

×

 10

1

/

2

) or larger paper.

❒

Use ordinary or recycled paper that has at least 70% whiteness.

❒

Duplex printing may interfere with the function due to text and patterns be-
ing visible through the paper.

Summary of Contents for c7528n





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands