manualshive.com logo in svg

Aficio c7528n, Setup Manual

Share
Download
Aficio c7528n Setup Manual Download Page 158

Preparing for Printing

18

A list of printers using TCP/IP appears.

L

Select the printer you want to use, and then click [

OK

].

Only printers that respond to a broadcast from the computer appear. To use
a printer not listed here, click 

[

Specify address

]

, and then enter the IP address

or host name of the printer.

Under Windows 95/98/Me, you cannot add an IP address partially similar to
the one already used. For example, if “192.168.0.2” is in use, “192.168.0.2xx”
cannot be used. Similarly, if “192.168.0.20” is in use, “192.168.0.2” cannot be
used.

M

Check that the port of the selected printer is displayed in [

Port:

].

N

Set a user code, if necessary.

This allows a SmartDeviceMonitor for Admin user to display and check statis-
tics about the number of sheets which each user prints. For details, see
SmartDeviceMonitor for Admin Help.

Up to 8 numeric characters can be entered. No alphabetic characters or sym-
bols are available.

O

Select the [

Default Printer

] check box to configure the printer as default.

P

Click [

Finish

].

Installation starts.

Q

Click [

Finish

] in the installation completion dialog box.

A message about restarting the computer may appear. Restart the computer
to complete installation.

A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run. If
you still want to install the printer driver, install using 

[

Add Printer

]

. See 

p.71

“If a Message Appears during Installation”

.

Installing the PCL or RPCS Printer Driver (IPP)

❒

To install printer driver under Windows 2000/XP Professional, Windows Serv-
er 2003, and Windows NT 4.0, you must have an account that has Manage
Printers permission. For this, log on as an Administrators or Power Users
group member.

A

Quit all applications currently running.

B

Insert the CD-ROM into the CD-ROM drive.

Summary of Contents for c7528n





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands