manualshive.com logo in svg

Aficio c7528n, Setup Manual

Share
Download
Aficio c7528n Setup Manual Download Page 446

Mac OS Configuration

306

Printer Utility for Mac

By using Printer Utility for Mac, you can download fonts, change the name of the
printer and so on.

❒

If a Macintosh and printer are connected by USB, you cannot use Printer Util-
ity for Mac.

❒

Printer Utility for Mac is included on the CD-ROM labeled “Printer Drivers and
Utilities”.

❒

Printer Utility for Mac requires Mac OS 7.6.1-9.x, or Mac OS X 10.1.x or
10.2.1. Mac OS X 10.0.x and 10.2 are not supported.

Installing Printer Utility for Mac

Follow these steps to install Printer Utility for Mac on the machine.

A

Start the Macintosh.

B

Insert the CD-ROM into the CD-ROM drive.

The CD-ROM icon appears.

C

Double-click the hard disk icon to open it.

D

Double-click the CD-ROM icon.

The contents of the CD-ROM appear.

E

Double-click the [

Mac OS 8 and 9

] folder.

❒

Under Mac OS X, double-click the 

[

Mac OS X

]

 folder.

F

Double-click the [

PS Utility

] folder on the CD-ROM.

G

Double-click the [

Printer Utility for Mac

] folder.

H

Double-click the folder of the language you use.

I

Move the “Printer Utility for Mac” file to the Macintosh hard disk using a
drag-and-drop operation.

J

Drag the CD-ROM icon to the Trash to eject the CD-ROM.

Printer Utility for Mac is installed.

Summary of Contents for c7528n





















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands