Aficio c7528n, Setup Manual

Page: 404 / 660

Monitoring and Configuring the Printer
264
btd is disabled. Communication via Bluetooth is unavailable
because btd is disabled in the security mode.
Enable the btd in the security mode.
centrod is disabled. Communication via parallel connection is un-
available because centrod is disabled in the
security mode.
Enable centrod in the security mode.
child process exec error! (process name) The network service failed to start. Turn the
printer off and then on. If this does not work,
contact your service or sales representative.
Connected DHCP Server(<DHCP server ad-
dress>). The IP address was successfully received
from the DHCP server.
connection from <IP address> Login was from the host IP address.
Could not attach to FileServer<error number> (In the remote printer mode) Connection to the
file server has not been established. The file
server has refused the connection. Check the
file server configuration.
Could not attach to PServer<print server> (In the remote printer mode) Connection to the
print server has not been established. The
print server has refused the connection. Check
the print server configuration.
Current Interface Speed:xxxMbps Speed of the network (10 Mbps or 100 Mbps)
Current IP address <current IP address> The IP address <current IP address> was re-
ceived from the dhcp server.
Current IPX address<IPX address> Current ipx address
DHCP lease time expired. DHCP lease time has expired. The printer tries
to discover the DHCP server again. The IP ad-
dress until now becomes invalid.
DHCP server not found. The DHCP server was not found. Make sure
that the DHCP is on the network.
dhcpcd start. The DHCPCD service (dhcp client service)
has started.
dpsd is disabled. PictBridge cannot be used when connected to
the digital camera because Pictbridge is dis-
abled in the security mode.
Enable PictBridge in the security mode.
Duplicate IP=<IP address>(from <MAC ad-
dress>). The same IP address is used. Each IP address
must be unique. Check the address of the de-
vice indicated in [MAC address].
Established SPX Connection with PServ-
er,(RPSocket=<socket number>, con-
nID=<connection ID>) (In the remote printer mode) Connection to the
print server has been established.
Message Problem and solutions