Aficio c7528n, Setup Manual

Page: 214 / 660

Preparing for Printing
74
B
Click the icon of the printer you want to use.
C
On the [ File ] menu, click [ Properties ].
D
Click the [ Accessories ] tab.
If options in the [ Change Accessories ] tab are disabled, bidirectional connection
is enabled. In this case, no change is necessary for option settings.
❒
If you are using the RPCS printer driver, click the [ Change Accessories ] tab.
❒
If you are using the PS printer driver, click the [ Device Settings ] tab.
E
Select options installed from the [ Option ] area, and then make the neces-
sary settings.
F
Select the total amount of the memory in [ Total Memory: ], when the option-
al SDRAM module is added.
G
Under [ Paper source tray settings ], click and highlight the tray to be used,
and then select the appropriate size, position, and type for the tray. Se-
lect the [
Tray locking ] check box to exclude the tray from the targets of au-
tomatic tray selection.
H
Click [ OK ] to close the printer properties dialog box. Click the [ Defaults ]
tab, and then click [ Change Accessories ] to display the option selection.