Aficio c7528n, Setup Manual

Page: 459 / 660

Appendix
319
Cautions to Take When Using in a network
Connecting a Dial-up Router to a Network
When the NetWare file server and printer are on opposite sides of a router, pack-
ets are sent back and forth, causing communication charges to be incurred. Be-
cause packet transmission is a specification of NetWare, you need to change the
configuration of the router. If the network you are using does not allow you to
configure the router, configure the printer instead.
Configuring the router
Filter packets so that they do not pass over the dial-up router.
❒
The MAC address of the printer doing the filtering is printed on the printer con-
figuration page. For details about printing a configuration page, see
p.161
“Printing a Configuration Page” .
❒
For details about configuring the printer if the router cannot be configured, see
the instructions below.
A
Display Web Image Monitor.
B
On the Web Image Monitor top page, click [ Login ].
C
Enter the user name and passwords, and then click [ OK ].
❒
For details about the password, consult your network administrator.
D
Click [ Configuration ] in the left area, click [ Network ], and then click [ NetWare ].
E
In the right area, select the [ Frame Type ] you are using.
F
Click [ Apply ].
G
Close the Web browser.
Using DHCP
This printer can be used in a DHCP environment. In a WINS server environment,
the printer name can simultaneously be registered with a WINS server.
Note the following points when an Ethernet interface and an IEEE 1394 (IP over
1394) interface are simultaneously installed.