Aficio c7528n, Setup Manual

Page: 318 / 660

Making Printer Settings Using the Control Panel
178
❖
Tray Switching
Specify the printer to change printing to the suitable tray, when printer driver
specifies different paper size or type from the current tray.
• Off
• On
❒
Default: Off
❖
RAM Disk
If the hard disk is not installed for PDF Direct Print, select a value of 2 MB or
higher.
This menu appears only when the hard disk is not installed.
• 0 MB
• 2 MB
• 4 MB
• 8 MB
• 16 MB
❒
Default: 4 MB
❒
When the amount of SDRAM is small and RAM Disk is set to 16 MB, print-
ing may not be possible depending on the print job and duplex printing may
be canceled. If this happens, increase the amount of SDRAM, or set RAM
Disk to 8 MB or less.
For details about the optional SDRAM module, see Setup Guide.
❖
Notify by E-mail
You can specify whether or not to send an error message to a preset e-mail
address when an error occurs in the printer.
• Off
• On
❒
After changing the setting, turn off the power of the printer briefly, and then
turn it on again.
❒
Default: On
For information, see Web Image Monitor Help.