Aficio c7528n Setup Manual Download Page 302

Page: 302 / 660

Making Printer Settings Using the Control Panel

162

❖

Firmware Version

• Firmware

The version number of the printer controller firmware is displayed.

• Engine

The version number of the printer engine firmware is displayed.

• NCS

The version number of the network interface firmware is displayed.

❖

Pages Printed

The total number of pages printed by the printer to date is displayed.

❖

Total Memory

The total amount of SDRAM installed on the printer is displayed.

❖

Controller Option

The items are displayed when the controller options are installed.

❖

Printer Language

The version number of the printer language is displayed.

❖

Options

The options installed are displayed.

❖

Consumption Status

The amount of toner remaining is displayed.

❖

Paper Input

Settings made on the

[

Paper Input

]

menu are displayed.

For details, see

p.158 “Paper Input Menu”

❖

Maintenance

Settings made on the

[

Maintenance

]

menu are displayed.

For details, see

p.165 “Maintenance Menu”

❖

System

Settings made on the

[

System

]

menu are displayed.

For more information, see

p.171 “System Menu”

❖

Host Interface

Settings made on the

[

Host Interface

]

menu are displayed.

When DHCP is active on the network, the IP address, subnet mask and gate-
way address appear in parentheses on the configuration page.

Summary of Contents for c7528n




















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for c7528n

Reviews:

Brands by name

Popular brands

Aficio c7528n, Setup Manual

Search results

Summary of Contents for c7528n

Reviews:

Brands by name

Popular brands