Affirmative YEStablet 7370 User Manual Download

Page: 82 / 104

Input

The Input tab allows you to define specific parameters that affect the appearance of the printed page

Input Properties Sheet

Language

YES

term

/IP supports a number of different Code Pages. The Code Page selected here should be the

same as that configured on the AS/400 for the specific device.

Ignore the Code Page

Edit

button,

since Code Page editing is not supported in the 7370.

Page Layout

Set the Default Page layout. Parameters are:

•

Page Orientation

. Select from Portrait, Landscape, and COR (Computer Output Reduction).

Note:

If you are using an impact dot-matrix printer,

Portrait

is recommended.

•

Automatic Page Orientation. This option is enabled by Default.

Note:

If you are using an impact

dot-matrix printer, it is recommended that this be

Disabled

•

COR Line Spacing Reduction.

This feature solves the problem of nonprintable margin area on the

printer.

Note

It is recommended that this feature be used only with laser printers.

•

COR Override

. This function corresponds to the IBM 3812 configuration parameter and defines

that a job with draft quality is printed in COR.

Overrides

If you wish to override the host system output settings, you can do so here.

Note:

If you are using an impact dot-matrix printer, it is recommended that you set Print Quality to

Force Draft

Summary of Contents for YEStablet 7370









































































































Search results

Summary of Contents for YEStablet 7370

Reviews:

Related manuals for YEStablet 7370

Brands by name

Popular brands

Affirmative YEStablet 7370, User Manual

Search results

Summary of Contents for YEStablet 7370

Reviews:

Related manuals for YEStablet 7370

Brands by name

Popular brands