Password
A system password cannot be set in the 7370.
PC Connection
Check the
Allow connection…
box to allow a USB connection with a Windows PC using ActiveSync.
Power
This is an important set of properties for the 7370 user.
•
Battery.
You have to disconnect the 7370 from the power cord or the cradle in order to see the
battery status. Wait several seconds to get an accurate reading. The
Main Battery
status shows the
amount of power left in the internal battery. The
Second Battery
status shows the amount of
power left in the auxiliary external battery, if there is one attached. When the batteries are in use,
the second battery will be used up first; when it is completely discharged, the 7370 should
automatically switch to the main battery without disrupting operation.
•
Schemes.
This allows you to define power schemes for both battery and external (AC) power
operation. Obviously, your battery scheme is very important in maintaining a long battery life.
User Idle
and
System Idle
are not implemented in the 7370, but you still must enter switch-state
times in these boxes. The three switch-state times are consecutive; the tablet times through the
User Idle
switch-state time before timing down through the
System Idle
switch-state time, and then
finally times down through the
Suspend
switch-state time before Suspending.
•
Device Status.
Some devices, such as the Cisco Aironet wireless adapter, have settings for power
consumption, and this tab shows the current settings. Some devices show up in this window even if
their power consumptions are not adjustable.
Regional Settings
When you choose an input locale, the effect is to change the wording on the Date/Time calendar, and to
change the default settings in the other tabs in this window. You can override the defaults by going to
the individual tabs and making other choices.
Registries Save/Restore
This is somewhat of a misnomer, since you can only save from this utility. But saving is very
important, because
parameter changes in the Control Panel or in applications will not be saved after a
Cold Boot unless you carry out a
Save Current Settings
operation in this window.
The procedure is:
1. Check the
Save Current Settings
box.
2. Click
OK
in the resulting Message box.
3. Wait several seconds, and then click
OK
in the “finished” Message box.
4. Click
OK
in the Registries Save/Restore window.
A Registry Save will also occur automatically if the 7370 is operating on battery power and reaches the
end of the battery life.
29
Summary of Contents for YEStablet 7370
Page 2: ...ii ...
Page 18: ...THIS PAGE INTENTIONALLY LEFT BLANK 4 ...
Page 48: ...THIS PAGE INTENTIONALLY LEFT BLANK 34 ...