Affirmative YEStablet 7370, User Manual

Page: 28 / 104

World Mode Enables the client adapter to adopt the maximum transmit power level and the
frequency range of the access point to which it is associated, provided the access point
is also configured for world mode. This parameter is available only in infrastructure
mode and is designed for users who travel between countries and want their client
adapters to associate to access points in different regulatory domains.
Options: Enabled or Disabled
Default: Disabled
Note When World Mode is enabled, the client adapter is limited to the maximum
transmit power level allowed by the country of operation's regulatory agency.
Specifies the rate at which your client adapter should transmit or receive packets to or
from access points (in infrastructure mode) or other clients (in ad hoc mode).
Auto is recommended for infrastructure mode; setting a specific data rate is
recommended for ad hoc mode.
Options: Auto, 1 Mb Only, 2 Mb Only, 5.5 Mb Only, or 11 Mb Only
Default: Auto
Data Rate Description
Auto Uses the 11-Mbps data rate when possible but drops to lower rates
when necessary
1 Mb Only Offers the greatest range but the lowest throughput
2 Mb Only Offers less range but greater throughput than the 1 Mbps Only
option
5.5 Mb Only Offers less range but greater throughput than the 2 Mbps Only
option
11 Mb Only Offers the greatest throughput but the lowest range
Data Rates
Note Your client adapter's data rate must be set to Auto or must match the data rate of
the access point (in infrastructure mode) or the other clients (in ad hoc mode) with
which it is to communicate. Otherwise, your client adapter may not be able to associate
to them.
14