Affirmative YEStablet 7370, User Manual

Page: 24 / 104

Table 1: Aironet 350 Adapter Configuration Properties
Parameter Description
SSID The service set identifier (SSID) identifies the specific wireless network that you want
to access.
Range: You can key in up to 32 characters (case sensitive)
Default: A blank field
Note: If you leave this parameter blank, your client adapter can associate to any access
point on the network that is configured to allow broadcast SSIDs (see Wireless Access
Points|Identification ). If the access point with which the client adapter is to
communicate is not configured to allow broadcast SSIDs, the value of this parameter
must match the SSID of the access point. Otherwise, the client adapter cannot access the
network.
Client Name A logical name for your Windows CE device. It allows an administrator to determine
which devices are connected to the access point without having to memorize every
MAC address. This name is included in the access point's list of connected devices.
Range: You can key in up to 16 characters
Default: A blank field
Note: Each computer on the network should have a unique client name.
Specifies the type of network in which your client adapter is installed.
Options: Yes or No
Default: Yes
Infrastructure
Mode Description
Yes Indicates that your wireless network is connected to a wired Ethernet
network through an access point.
Infrastructure
Mode
No Indicates that your wireless network consists of a few wireless
devices that are not connected to a wired Ethernet network through
an access point (referred to as
ad hoc mode ).
10