Afag PDZ-128, Translation Of The Original Montage Instructions

Page: 24 / 58

24 PDZ-128-160-200 OI-vers. 3.2 gb. 03.07.2018
CAUTION
It is the responsibility of the system manufacturer that persons
perform their work properly when setting up a gantry axis in an
open system so that an uncontrolled start-up of the axis is
prevented.
NOTE
It is the responsibility of the owner to ensure the safety of the control
system which controls the gantry axis.
2.3.1 Noise Emission
NOTE
The gantry axis generates 78 dB(A) during full-load operation.
Depending on the attachments, the environment and the resonance
of the safety fence, these values may be exceeded and result in a
disturbing higher noise level.
CAUTION
It is the responsibility of the system manufacturer to ensure that
the permitted noise limit values are complied with or specifies
that the operator must wear hearing protection.
Safety fence at the assembly system
NOTE
If a gantry axis is installed in an assembly system, the system must
be provided with a safety fence as acceleration values up to 3g can
occur when the gantry axis is in full Installation. Persons could thus
be injured by parts flying away.