ILD15 HANDBOOK
Box Contents
1 x ILD15
1 x Earth Crimp Terminal
1 x A6 Deaf Logo
1 x Installation Handbook
1 x Designing an Induction Loop hb.
Handbook Contents
!
!
Introduction
!
Quick Start
!
Installation
!
Operation
!
Troubleshooting
!
Technical Specification
!
Warranty
!
Declaration Of Conformity
Safety
This symbol is used to alert the user to important
operating or maintenance instructions.
The Lightning bolt triangle is used to alert the user
to the risk of electric shock.
SAFETY
1. It is important to read these instructions, and to follow them.
2. Keep this instruction manual in an accessible place.
3. Do not install this equipment near any heat sources such as radiators, heating
vents or other apparatus that produces heat.
4.
WARNING: THIS APPARATUS MUST BE EARTHED.
5.
The ILD15 is designed to be permanently connected apparatus and must
be installed with all applicable installation regulations. A readily accessible
disconnect device shall be incorporated in the building installation power
wiring.
6. Mount the ILD15 with the wiring entering from the side of the unit. Position
cables in a neat manner, and tighten the cable clamps to ensure the cables are
fully restrained. The cables should be positioned in such a manner that any
liquid spilled on to them will not run into the unit.
7. Do not mount the unit upside down. This unit is designed to be fitted to the top
of a lift / elevator ceiling.
8. Refer all servicing and installation to qualified personnel.
WARNING: Isolate AC power externally before servicing or replacing fuses.
9. The amplifier generates some heat during normal operation and needs
adequate ventilation. It should not be fitted in a fully enclosed space.
