Afag PDZ-128, Translation Of The Original Montage Instructions

Page: 29 / 58

PDZ-128-160-200 OI-vers. 3.2 gb. 03.07.2018 29
3.1.4 Warranty
3.1.5 Areas of application
The gantry axes of the PDZ series have been specially designed for horizontal
Installation. The motor/gear combination is fitted to the rigid axis part and is thus not
included in the moving mass of the system. This enables high dynamics and
favourable weight distribution for the support axis or substructure. Do not operate the
unit under conditions with increased dirt accumulation as no further protective
measures or covers are available.
The typical areas of application are:

Moving module superstructures over long distances

Use as gantry modules

In combination with OZ cantilever for fast and flexible pick & place
applications.
NOTE
Other applications, particularly the transport of persons and animals
as well as usage as pressing and bending device for cold working of
metals are not allowed. The axis must also not be used in the
chemical and food industry and in potentially explosive areas without
taking additional measures. Please contact our technical department
if such applications are planned.
The term of the warranty on Afag handling components and systems is:

24 months following commissioning, but a maximum of 27 months following delivery.

Wear parts (e.g. shock absorbers) are not covered by the warranty. *
The warranty covers the replacement or repair of defective Afag parts. No further claims will be accepted.
The warranty will be voided in event of the following:

Use for other than the intended purpose

Failure to observe the notes on installation, commissioning, operation and maintenance in the
operating manual

Improper installation, commissioning, operation and maintenance

Independent repairs and constructional changes without prior instruction by Afag Automation AG

Removal of the serial number on the product

Using the module without shock absorbers, or with defective shock absorbers

Inadequate monitoring of wear parts
*A customer has the right to a defect-free product. This is also applicable for accessories and wear parts, if they are defective.
However, wear does not fall within the scope of the warranty.