Afag PDZ-128 Translation Of The Original Montage Instructions Download

Page: 2 / 58

PDZ-128-160-200 OI-vers. 3.2 gb. 03.07.2018

These Montage Instructions apply to:

Gantry axis
PDZ-128

Gantry axis Gantry axis
PDZ-160 PDZ-200

Version of this documentation

PDZ Gantry axis

PDZ-128-160-200 OI-vers. 3.2 gb. 03.07.2018

Symbols:

Assembly and initial start-up must be carried out by qualified personnel
only and according to these Montage Instructions.

DANGER

Indicates an immediate threatening danger.
Non-compliance with this information can result in death or
serious personal injuries (invalidity).

WARNING

Indicates a possible dangerous situation.
Non-compliance with this information can result in death or
serious personal injuries (invalidity).

CAUTION

Indicates a possibly dangerous situation.
Non-compliance with this information can result in damage to
property or light to medium personal injuries.

NOTE

Indicates general notes, useful operator tips and operating
recommendations which don't affect safety and health of the
personnel.

The actual serial number will

be sticked in here upon delivery of

the device.

Summary of Contents for PDZ-128



























































Search results

Summary of Contents for PDZ-128

Reviews:

Related manuals for PDZ-128

Brands by name

Popular brands

Afag PDZ-128, Translation Of The Original Montage Instructions

Search results

Summary of Contents for PDZ-128

Reviews:

Related manuals for PDZ-128

Brands by name

Popular brands