F
2
9101
0104
.fm
IDM
English
8
Use and maintenance manual
Booklet
1
GENERAL AND SAFETY INFORMATION
2
–
Electrical equipment correctly operates up to 1000 m above sea level.
If it is not possible to respect one or more of the conditions listed, essential for
the correct functioning of the electric equipment, it is necessary to arrange at
the contractual phase which supplementary solutions to adopt, to create the
more adequate conditions (for example, specific electric components, condi-
tioning devices, etc.).
SAFETY WARNINGS FOR ENVIRONMENTAL IMPACT
2
–
Every organization has the task of applying the procedures to identify and check the
influence that its proper activities (products, services, etc.) have on the environment.
The procedures to identify significant environmental impacts must bear into consider-
ation the following listed factors.
- Emissions in the atmosphere
- Liquid drainage
- Waste management
- Ground contamination
- Utilization of raw materials and natural resources
- Local problems relating to environmental impact
–
To this purpose, the manufacturer supplies some indications that will have to be con-
sidered by all the personnel authorized to interact with the machine during its foreseen
life to prevent environmental impact.
–
All packing elements are to be disposed of according to the ruling laws in the country
where it is used.
The film sealing and shrinking phases can produce low smoke emissions during the
normal work phases.
–
In case of installation in environments where foodstuffs are present, keep machine
and surrounding operating area clean to avoid the growth of bacterial elements and
risk of contamination.
–
During maintenance or replacement, avoid dispersion of polluting products (oils,
greases, etc.) and provide to differentiated waste disposal according to the various
materials. In case of electronic components (battery pad), dispose of as special waste.
–
When dismissing machine, select all components according to their characteristics
and provide to differentiated waste disposal.
–
The working products and wastes, lubricants and any machine component are to be
disposed of in the differentiated manner respecting the ruling laws of the country
where it is used.
