F
2
9102
6101
.fm
IDM
English
22
Use and maintenance manual
Booklet
2
Basic MACHINE ASSEMBLY
2
AUTOMATIC CYCLE START UP
31
Important
Before starting the machine, in manual mode make sure that all moving units
(carriage, clamp, top, etc.) stop at limit stop.
If the machine operates in very cold environments, perform the "Pre-heating
procedure" described in the keyboard booklet.
Proceed as indicated.
1 –
Make sure that all safety devices of the machine and of the line, on which the
machine is installed, are perfectly installed and efficient.
2 –
Activate the pneumatic supply.
3 –
Turn main switch to position
(I)
(ON) to turn on the power supply.
4 –
Place the reel of film onto the reel-holder carriage (see booklet 3).
5 –
Lock the film in the clamp (see booklet 4).
6 –
Rotate selector
(D)
to "Hand icon" position.
7 –
Press button
(C)
to reset the light-sensitive barriers (if available).
8 –
Press button
(A)
to activate the power supply to the electric motors.
9 –
Press button
(C)
. The machine is set to the beginning of the working cycle.
10 –
Rotate selector
(D)
in position "Automatic cycle icon".
11 –
Press the push-button
(A)
to start the automatic cycle.
The button pilot light goes on.
After these operations the machine is operating in automatic mode.
Important
If the "Automatic cycle" does not start, repeat cycle start up phases.
IDM-29145201900.tif
(C)
(D)
