3
CONTROL DESCRIPTIONS
The figure illustrates the positions of the controls on the
machine.
A)
POWER ON light:
White indicator light.
Signals that the main switch is on and that the
machine is powered.
B)
EMERGENCY light
Red indicator light.
The light indicates that the machine is in
emergency or similar to emergency conditions.
C)
AUTOMATIC/MANUAL selector:
Two-way selector for machine operating mode.
Key turned to the right - the machine is in
MANUAL mode.
Key turned to the LEFT - the machine is in
AUTOMATIC mode.
D)
STOP CYCLE button:
To stop the automatic cycle, the arm
decelerates until it is in phase. Press the
AUTOMATIC START BUTTON to restart from
this condition.
E)
OPEN DOOR REQUEST selector:
To stop the machine and permit operator
access to the work area.
F)
MOTOR DRIVE button:
Button that electrically enables the machine.
It must be pressed after every emergency
stop that cuts off the emergency circuit.
G)
RESET button
Yellow button.
Restores initial cycle conditions after each
emergency intervention.
H)
AUTOMATIC CYCLE button:
Green light button.
When this button is pressed the automatic
cycle starts if all initial cycle conditions are
verified and if the machine is not in emergency
conditions. Hold the button down for several
seconds until the cycle start siren stops.
The green light will turn on to indicate correct
automatic operations.
