F
2
9102
6101
.fm
IDM
English
30
Use and maintenance manual
Booklet
2
Basic MACHINE ASSEMBLY
2
REPLACING THE INFEED CHAIN
44
Proceed as indicated.
1 –
Start the machine in "manual"
mode.
2 –
Stop the chain with link
(A)
in an
easily accessible position.
3 –
Stop the machine in safe
conditions.
4 –
Loosen the chain
(B)
(see "ad-
justing the roller conveyor chain").
5 –
Access the bottom part of the
turntable to connect the end of the
chain to be replaced with the new
one as to make replacement easier.
6 –
Extract the link
(A)
and discon-
nect the chain
(B)
.
7 –
Connect the end of the chain to
be replaced with the new one to facil-
itate replacement.
8 –
Remove the chain to be replaced
until the connection with the new one
and disconnect the ends.
9 –
Insert a link
(A)
to connect the new chain
(B)
.
10 –
Make sure that the path matches the one shown in the figure.
11 –
Adjust chain tension (See "adjusting the roller conveyor chain").
12 –
Restart the machine in "manual" mode to check correct operations.
Caution - Precaution
Before restarting the machine, make sure that no tools or material are left near
parts in motion.
MACHINE DISPOSAL
45
Important
This operation must be performed by specialised technicians in accordance
with the workman's safety laws in force.
Pay particular attention to film residues (non-biodegradable products), lubri-
cant oil and non ferrous components (rubber, PVC, resin etc.) disposal.
Proceed to the material disposal with respect to the law.
IDM-29145201500.tif
(B)
(A)
