Booklet 5
CUTTER ASSEMBLY
-
4
-
English
F
291
051100.
fm
ID
M
version:
WIRE AND PRESSURE PAD
ADJUSTMENT INSTRUCTIONS
Information
Before carrying out any adjusting intervention, the
authorized personnel must activate all the safety
devices available and consider the possibility of
informing the personnel working on the machine
and that of the surrounding area. In particular, ade-
quately mark the surrounding areas and avoid ac-
cess to all devices that, if activated, could provoke
dangerous unexpected conditions and risk to the
safety and health of persons.
ADJUSTING THE CUTTING UNIT
Proceed as follows:
1 -Loosen the screws (
A
).
2 -Adjust height of the cutting unit (
F
) so that pad (
B
)
is centered respect to the film and tighten screws
(
A
).
3 -Loosen the screws (
C
).
4 -Adjust length of arm (
D
) and lean the pad to the
pallet with pneumatic cylinder (
E
) completely clo-
sed.
ADJUSTMENT INFORMATION
IDM-29124300400.tif
pad (B)
pneumatic cylinder (E)
screw (C)
screw (C)
screw (A)
screw (A)
cutting unit (F)
arm (D)
