12
USING THE MANUAL CONTROLS
Manual controls are to be used to individually operate
the machine moving parts, in case of service or control
before the automatic cycle start-up.
IMPORTANT: Manual controls can only be
accessed if the AUTOMATIC/MANUAL machine key
selector is in the Manual (Right) position and not
Emergency condition is active.
Proceed as follows for this operation:
1 – From the “Main” page press key (A) to open the
Manual Movements page. Press key (B) or (C) to scroll
the various manual pages (icon (D) indicates the
current manual control page).
Select the required manual icon and press the
corresponding key.
