F
2910376
00.
fm
ID
M
English
6
Use and maintenance manual
Booklet
3
SPOOL CARRIAGE UNIT
2
REEL CHANGE
12
The refurnishment of the spool is to be done according to the machine operating mo-
dalities.
–
Machine operation in "manual mode"
–
Machine operation in "automatic mode"
SPOOL REFURNISHMENT WITH OPERATION IN "MANUAL MODE"
13
Proceed as indicated.
1-
Start the machine in "manual" mode.
2-
Operate the control panel to move "gripper-cutting" unit and reel holder carriage
to the "reel change" position.
3-
Operate selector and open the access door to the operating area.
4-
Extract the key of selector.
5-
Only access the area by the specific door (inter-locked mobile guard).
Information
The key must be kept by the person who carries out the intervention.
Caution - Precaution
At the end of the intervention, the operator must check that the area is free of
dangers and, after closing the access door, he/she must insert the key into se-
lector to activate the machine operation again.
6-
Remove the cardboard spool core.
7-
Insert the new reel
(A)
on the support.
8-
Collect some film
(C)
until a thin cord is obtained and make it pass in the conical
area of the rollers.
Film spool (A)
Film spool (A)
Film (C)
Pre-stretch roller (D)
film core
Support (B)
ID
M-2915
6800400.
