40-7705ii-UM
Page 40
Rev. 1 June 11, 2018
Some Alarm automation systems may not be configured to properly
report these types of messages. You may have some other reason not to
send these to automation but, be aware, these are important messages as
they indicate zones that are possibly stuck, improperly configured,
improperly wired or in an alarm condition and may not be able to report
a new event.
Options are:
Individual Subscriber Unit settings control delivery… , which is
configured for each Subscriber in its configuration settings.
Deliver all old alarms… , which will ignore Subscriber configuration
and report all old alarms to automation.
Never deliver old alarms… , which will ignore Subscriber configuration
and not report all old alarms to automation.
Once you have entered data in all the required fields, click .
If you selected Universal Unit ID Range, the following
screen appears.
Figure 6-6 Add a Business Unit – Universal IPLinks
Enter the ID or IDs of the IP-Link Transceivers that will handle the Subscribers
for this Business Unit.
When
complete click…
The following screen, or one similar if Alarm Automation System were not
checked should be presented. After reviewing the information,
Click Add Business Unit to complete the process