40-7705ii-UM
Page 100
Rev 1 June 11, 2018
9.
Confirm the existence of the needed files with the ls command:
ls<Enter>
There should be a file for each Business Unit. Each file begins with “ipctrl.”
immediately followed by the case sensitive name of the Business Unit and ending
with “.cfg”.
10.
Next, using the cat command, view the contents of the each file and confirm that
all files related to an existing Business unit have the same line as instructed to add
in step 6 above.
11.
Once the files are confirmed to exist and have the correct instruction, the
MultiNet programs should be stopped and restarted to ensure the new settings are
in effect. At the Konsole screen enter the following commands.
stopall aesctrl<Enter> then
startall aesctrl<Enter>
12.
Create alarm signals using a Subscriber in the first or original Business Unit and
confirm proper delivery to Alarm Automation.
13.
Create alarm signals using a Subscriber in the additional Business Unit and
confirm proper delivery to Alarm Automation.
14.
If there are any other Business Units they should be tested as well.