71
5. Trace around the head of the engine being care-
ful to keep the template in the same location.
6. Use a hobby knife to cut out the engine cylinder
exit opening as shown.
7. Check the fit of the template at this time. It may
be necessary to make small adjustments to the
cutout to get it to fit properly.
8. Install muffler and enlarge template to accom-
modate muffler opening as shown below.
9. Align template with bottom of cowl. Use a felt
tip marker to transfer the template cutout pattern
to the cowl and mark cut location.
Note:
Pay close attention to the marker you
choose. Some permanent markers may not
be easily removed. Also, When using
rubbing alcohols or other paint removers,
always test on painted parts before using!
