18
5. Apply a small drop of medium CA to the strut
eyelet as shown. Screw the eyelet into the pre-
drilled hole in the bottom of the wing.
Note:
CA glues have a fast drying time.
Remember to work quickly.
7. Finished strut mount and eyelet assembly shown
below. Repeat the same steps for the remaining
wing before continuing.
8. Gather the following items for mounting of the
struts to the wings:
◊
2 - Struts
◊
8 - 6-32 mounting bolts
◊
8 - 6-32 lock nuts
◊
4 - Set pins
◊
4 - Cotter pins
◊
1 - Pushrod adjustment wrench
◊
1 - Custom allen wrench
◊
2 - Foam transportation pads
6. Install the remaining eyelet in the wing as
shown.
