23
2. Gather the rudder control horn parts as shown
below. Two ball link assemblies, two left and
two right side control horns. Assemble the ball
links between the control horns as shown. Se-
cure with nylon lock nut. Start with the center
hole in the control horn. The ball link may be
moved up or down for more or less control
throw.
3. Thread brass coupler half way into ball link.
Note:
There are two types of 4-40 couplers supplied,
two are for the throttle and choke pushrods
and four are for the pull pull system. The
couplers with the solid base are to be used for
the pull pull assembly.
4. Place the control horns over the predrilled
mounting holes.
5. Use a drop of thick CA glue on each screw as
shown.
Note:
CA glues have a fast drying time.
Remember to work quickly.
