43
2. Slide the spacer followed by the wheel onto the
axle. Do not use the inner wheel collar that is
used in the stock wheel installation.
3. Slide the remaining wheel collar onto the axle.
Tighten the wheel collar set screw.
Optional “Tundra” Tire
Installation
1. Gather the optional “Tundra” tires and mounting
hardware as shown below.
◊
2 - “Tundra” Tires
◊
2 - Wheel collars
◊
2 - Spacers
◊
2 - Hub caps
◊
6 - Hub cap mounting screws
Note:
“Tundra” tires are an optional accessories
available through Aeroworks.
4. Using the 3 mounting screws, mount the hub cap
as shown below.
