13
Aileron/Flap Servo Installation
1. The ailerons/flaps have been pre-hinged and
glued to the wing panels and are ready for flight.
No other steps are necessary for hinging.
Gather the following items:
◊
1 - Wing panel
◊
1 - Aileron servo
◊
1 - Flap Servo
◊
8 - Servo mounting screws
◊
2 - 1 1/4” servo arm
◊
1 - Safety clip
◊
1 - 18” Servo Extension
WING ASSEMBLY
2. Layout the servos as shown below. Install the
extensions at this time and double check exten-
sion length.
3. Attach the 18” extension to the servo lead and
secure with Aeroworks Safety Clip. Ensure the
connectors will not come apart from vibration or
light tension. Safety clips available from
Aeroworks.
4. Fasten the pull string from the servo hole to the
male plug of the servo extension.
