16
5. Use thick CA on each screw prior to installing to
lock screws in place.
Note:
CA glues have a fast drying time.
Remember to work quickly.
6. Align the left and right sides of the control horns
to the mounting holes and mount using six wood
screws as shown.
7. Use tape to hold aileron in the neutral position.
Plug the servo into the receiver and turn radio
on. Ensure the servo trim and sub trim is cen-
tered. Adjust the length of the pushrod so that
the servo arm is parallel to the aileron hinge line
when it is placed on the servo output shaft.
Screw servo arm on the servo output shaft.
Note:
On metal geared servos use Loctite for all
Servo arm mounting screws.
4. Align the control horns over the factory drilled
holes.
