34
8. Repeat the previous steps for the remaining stab
assembly.
Stab Adjustment
1. Set the stab incidence to zero for general flying.
This can be achieved by setting the front L
bracket on the top of the pre-installed plywood
spacer and tightening the mounting bolts as
shown.
2. 1 degree of positive incidence can be achieved
by pushing the stab to the very top of the mount-
ing slot. This stab location is recommended for
towing purposes. To help raise the tail due to the
weight of towing.
3. 1 degree of negative incidence can be achieved
by removing the plywood spacer at the bottom
of the mounting slot. This stab position is not
recommended but can be accomplished by the
removal of this spacer. This will lower the tail of
the plane in flight.
