61
9. Secure the rubber stopper with set screw. Take
care not to strip threads by over tightening set
screw.
Fuel Tank Installation
1. Gather the fuel tank parts as shown below. Fuel
tank, fuel tubing, foam rubber, fuel “T”, fuel
filler dot, fuel filter and nylon ties.
Note:
The fuel “T”, and fuel filter are not supplied,
but are available through Aeroworks.
2. Install a short piece of fuel line and the fuel “T”
to the fuel pick up tube.
Note
: Using a heat gun to soften the fuel line will
help with the installation of the fuel “T”.
3. Install the fuel filter, fuel pick up and fuel filler
lines to the fuel tank.
Note:
It is recommended you always use a fuel
filter in the fuel line to the carburetor.
T
Filter
Fill
Line
Carb
